RAW MATERIAL INSPECTION All the raw materials are 100% virgin and to be tested qualified before putting into production.
SPC PRODUCTION PROCESS
01 Extrusion , Conditioning For 24h-48h
02 UV Coating & Annealing , Conditioning For 48h-72h
03 Cutting , Profiling & Micro Beveling
04 Underlay Applying (Optional)
05 Manual Quality Inspecting & Packing
QUALITY CONTROL IN PRODUCTION PROCESS
Step 01 Conditioning for 24 -72 hours to obtain more stable dimonsional performance
Step 02 SPC Extrusion Thickness Measurement
Step 03 Recycled Water Cooling To Improve The Dimensional Stability
Step 04 Spot Check The Straight Angle Of The Product After Unlocking
Step 05 Check The Quality Of Lock By Stitching On-Site After Unlocking
Step 06 Inspecting The Accuracy Of The Click Profile Under a Projecting Lantern
Step 07 QC Spot Check Before Packaging
QUALITY INSPECTION OF FINISHED PRODUCTS
Thermal & Humid Fluctuation Chamber: The chamber is used to provide the simulation of a high-temperature, low-temperature and humid environment, where we can test the performance stability of the vinyl products by detecting if there is any damage caused by the thermal expansion and contraction.
Tensile Strength Of Click: To measure the breaking strength of the locking system of SPC & LVT floor.
Peel Strength: To measure the bond strength between decor film and SPC & PVC core layer.
Scratch Test: To test the performance of surface scratch resistance.
Abrasion Test: To test the performance of wear layer to resist being worn away.
Thickness: To measure the overall thickness of a vinyl floor tile/plank.
Rectangularity: To measure the oblongness of 4 sides of the vinyl plank or tile, ensue each plank can be matched seamlessly.